Upload Photos Bluetooth From Nikon to Phone

Use SnapBridge to pair the camera with your smart device as described below.

• Nikon Z Mount Mirrorless Cameras
• Other Cameras

Nikon Z Mountain Mirrorless Cameras

1. Camera: Turn the camera on.

2. Camera: Select Connect to smart device > Pairing (Bluetooth) in the menus, then highlight Offset pairing and press J to display the camera name.

   

3. Smart device: Launch SnapBridge on the smart device and tap Connect to photographic camera.

   

   If yous skipped pairing past borer Skip at the top right corner of the welcome dialog, tap Connect to camera in the tab and proceed to the next step.

   

4. Smart device: Tap the desired model, and then tap Pairing (Bluetooth) when prompted.

   

   

   Notation: This step volition not be required the next time the devices are paired.

   Note: You must enable location services when using Bluetooth. Be sure to grant location access if prompted.

   Cheque that the SnapBridge app is upwards to date. If you lot are using the latest version and no pick for your camera is displayed, exit the app, confirm that information technology is not running in the background (the procedure varies with the smart device; see the documentation provided with your device for details), check that the device is connected to the Internet, and then re-launch the app.

5. Smart device: Tap the camera proper name.

   

6. Camera/smart device: Confirm that the camera and smart device display the same authentication code (the code is circled in red in the illustrations beneath).

   

   

7. Camera/smart device: Initiate pairing.

   • Camera: Press J.

   • Smart device: Tap PAIR (the push button circled in red in the illustration below, which may be labelled differently in different versions of the operation arrangement).

     

   If you wait likewise long between pressing the button on the camera and tapping the button in SnapBridge, pairing will fail and an error volition exist displayed.

   • Camera: Press J and return to Pace 1.
   • Smart device: Tap OK and return to Step v.

8. Smart device: Tap OK when pairing is complete. The tab will be displayed.

   

   

   Connection status is shown by the following icons in the summit correct corner of the tab:

   No Bluetooth bespeak detected from the photographic camera. If no signal can be detected even when your device is close to the photographic camera, check camera network settings.

   

   The SnapBridge app has detected the camera'due south Bluetooth signal. Yous tin now access the SnapBridge app's various features.

   

   The SnapBridge app has established a Bluetooth connection to the camera or is in the process of downloading pictures.

   

If an mistake occurs during pairing, read the solutions hither before attempting pairing again.

To pair with boosted cameras, tap , select Add photographic camera, and repeat Steps four–8. SnapBridge can exist used to pair with up to 5 cameras.

If prompted to grant the SnapBridge app permission to access storage or location information, follow the on-screen instructions, every bit otherwise many features will be unavailable.

Other Cameras

Note: Some displays for some cameras may differ from those shown here.

1. Photographic camera: Turn the photographic camera on.

2. Photographic camera: In the menus, select either Connect to smart device or Connect to smart device > Pairing (Bluetooth), and then highlight Outset or Offset pairing and press J (in the case of cameras that do non offer either Starting time option, the final portion of this pace tin be omitted).

   When the camera displays either of the pairing dialogs beneath, ready your smart device and proceed to the next step.

   

   

   The camera may not display the bulletin shown above. If the camera displays the following message, press J and continue to the next step.

   

   If the camera displays an NFC dialog, touch the NFC antenna on the smart device to the photographic camera logo (N-Marking), then wait for SnapBridge to launch and go on to Step seven. To proceed without using NFC, press the camera J push button and proceed to the adjacent footstep.

   

3. Smart device: Launch SnapBridge on the smart device and tap Connect to camera.

   

   If you lot tapped Skip at the top right corner of the welcome dialog to skip pairing when launching SnapBridge for the first time, tap Connect to camera in the tab and proceed to Footstep 4.

   

   SnapBridge may non show the camera proper name if launched before the photographic camera displays the launch prompt (Stride 2). Exit SnapBridge and confirm that information technology is not running in the background (the procedure varies with the smart device; see the documentation provided with your device for details) before tapping the SnapBridge icon to launch SnapBridge again.

4. Smart device: Tap the desired model.

   

   Note: This step will non be required the next time the devices are paired.

   Note: You must enable location services when using Bluetooth. Be sure to grant location access if prompted.

   Bank check that the SnapBridge app is up to engagement. If you are using the latest version and no option for your camera is displayed, exit the app, confirm that it is not running in the background (the procedure varies with the smart device; see the documentation provided with your device for details), check that the device is connected to the Internet, and then re-launch the app.

5. Smart device: Tap the camera name.

   

6. Camera/smart device: Confirm that the camera and smart device display the same hallmark code (the code is circled in red in the illustrations beneath).

   

   

7. Camera/smart device: Initiate pairing.

   • Camera: Press J.

   • Smart device: Tap PAIR (the push button circled in red in the illustration below, which may be labelled differently in different versions of the performance organisation).

     

   If you wait besides long betwixt pressing the push on the camera and borer the push button in SnapBridge, pairing will neglect and an error volition exist displayed.

   • Camera: Press J and render to Step 1.
   • Smart device: Tap OK and return to Footstep 3.

8. Camera/smart device: Follow the on-screen instructions.

   • Photographic camera: Press J. When pairing is complete, the camera volition display a message stating the camera and smart device are connected. Press J and follow the on-screen instructions.

     Annotation: Depending on the camera, a dialog that clears from the brandish automatically may appear in place of this message.

     

   • Smart device: Pairing is complete. Tap OK to exit to the tab.

     

     

     Connectedness status is shown by the following icons in the summit right corner of the tab:

     No Bluetooth signal detected from the camera. If no signal can be detected even when your device is close to the camera, bank check camera network settings.

     

     The SnapBridge app has detected the camera'due south Bluetooth signal. You tin can now access the SnapBridge app's various features.

     

     The SnapBridge app has established a Bluetooth connection to the camera or is in the procedure of downloading pictures.

     

If an error occurs during pairing, read the solutions here before attempting pairing again.

To pair with boosted cameras, tap , select Add together camera, and repeat Steps 4–eight. SnapBridge can be used to pair with up to v cameras.

If prompted to grant the SnapBridge app permission to access storage or location data, follow the on-screen instructions, as otherwise many features will be unavailable.

• Nikon Z Mountain Mirrorless Cameras
• Other Cameras

Nikon Z Mount Mirrorless Cameras

1. Camera: Turn the photographic camera on.

2. Camera: Select Connect to smart device > Pairing (Bluetooth) in the menus, and so highlight Outset pairing and printing J to display the camera proper noun.

   

3. iOS device: Launch SnapBridge on the iOS device and tap Connect to camera.

   

   If you skipped pairing by tapping Skip at the elevation right corner of the welcome dialog, tap Connect to camera in the tab and keep to the next step.

   

4. iOS device: Tap the desired model, and so tap Pairing (Bluetooth) when prompted.

   

   

   Note: This footstep will not exist required the side by side time the devices are paired.

   Check that the SnapBridge app is up to appointment. If you are using the latest version and no option for your camera is displayed, exit the app, confirm that it is not running in the groundwork, check that the device is connected to the Internet, and then re-launch the app.

5. iOS device: Tap the camera proper name.

   

6. iOS device: A confirmation dialog will be displayed; read the pairing instructions carefully and tap Understood.

   

7. iOS device: Tap the camera name when prompted.

   

8. Camera/iOS device: Initiate pairing.

   • Camera: Printing J.

   • iOS device: Tap Pair (the push button circled in ruddy in the illustration below, which may be labelled differently in different versions of the performance organization).

     

9. iOS device: Tap OK when pairing is complete. The tab will be displayed.

   

   

   Connection status is shown past the following icons in the elevation correct corner of the tab:

   No Bluetooth signal detected from the camera. If no signal can be detected even when your device is shut to the camera, check camera network settings.

   

   The SnapBridge app has detected the photographic camera'southward Bluetooth signal. Yous tin at present access the SnapBridge app's various features.

   

   The SnapBridge app has established a Bluetooth connectedness to the camera or is in the procedure of downloading pictures.

   

If an error occurs during pairing, read the solutions here before attempting pairing once more.

To pair with additional cameras, tap , select Add together camera, and echo Steps iv–9. SnapBridge can exist used to pair with up to five cameras.

If prompted to grant the SnapBridge app permission to admission pictures on the smart device, follow the on-screen instructions.

Other Cameras

Note: Some displays for some cameras may differ from those shown hither.

1. Photographic camera: Turn the camera on.

2. Camera: In the menus, select either Connect to smart device or Connect to smart device > Pairing (Bluetooth), so highlight Start or Offset pairing and press J (in the example of cameras that practise not offer either Start pick, the concluding portion of this stride can be omitted).

   When the photographic camera displays either of the pairing dialogs below, ready your smart device and proceed to the next step.

   

   

   If the either of the post-obit messages are displayed, printing J repeatedly until y'all are prompted to launch SnapBridge.

   

   

3. iOS device: Launch SnapBridge on the iOS device and tap Connect to camera.

   

   If yous tapped Skip at the top right corner of the welcome dialog to skip pairing when launching SnapBridge for the first time, tap Connect to camera in the tab and keep to Stride iv.

   

   SnapBridge may not show the camera proper noun if launched before the photographic camera displays the launch prompt (Step 2). Exit SnapBridge and ostend that it is not running in the groundwork before tapping the SnapBridge icon to launch SnapBridge once again.

4. iOS device: Tap the desired model.

   

   Note: This stride volition not be required the adjacent time the devices are paired.

   Bank check that the SnapBridge app is up to date. If you are using the latest version and no choice for your camera is displayed, get out the app, ostend that it is not running in the groundwork, cheque that the device is connected to the Internet, and then re-launch the app.

5. iOS device: Tap the photographic camera name.

   

6. iOS device: A confirmation dialog will be displayed; read the pairing instructions carefully and tap Understood.

   

7. iOS device: Tap the camera name when prompted.

   

8. Camera/iOS device: Initiate pairing.

   • Camera: Press J.

   • iOS device: Tap Pair (the button circled in red in the illustration beneath, which may be labelled differently in different versions of the performance system).

     

9. Camera/iOS device: Follow the on-screen instructions.

   • Camera: Press J. When pairing is complete, the camera will display a message stating the camera and smart device are connected. Press J and follow the on-screen instructions.

     Note: Depending on the camera, a dialog that clears from the display automatically may announced in place of this message.

     

   • iOS device: Pairing is complete. Tap OK to go out to the tab.

     

     

     Connexion status is shown past the following icons in the superlative right corner of the tab:

     No Bluetooth signal detected from the camera. If no signal can exist detected fifty-fifty when your device is close to the photographic camera, check camera network settings.

     

     The SnapBridge app has detected the camera's Bluetooth signal. You lot can now access the SnapBridge app'southward various features.

     

     The SnapBridge app has established a Bluetooth connection to the camera or is in the process of downloading pictures.

     

If an mistake occurs during pairing, read the solutions here before attempting pairing once again.

To pair with additional cameras, tap , select Add camera, and repeat Steps 4–9. SnapBridge can exist used to pair with upwardly to five cameras.

If prompted to grant the SnapBridge app permission to access pictures on the smart device, follow the on-screen instructions.

halestwel1985.blogspot.com

Source: https://nikonimglib.com/snbr/onlinehelp/en/02_connect_02.html

Share this post